Geothermal Designer Boot Camp
Learn by doing. This course was designed for experienced geothermal professionals interested in becoming skilled designers. Includes an unlimited subscription to LoopLink RLC design software and all assignments are completed on this web-based plat
by Ryan Carda
Application of Air-to-Water Heat Pumps for Hydronic Heating & Cooling
This course introduces the technology used in modern air-to-water heat pumps and shows how to build complete systems around them.
by John Siegenthaler
ASHRAE 62.2 Ventilation for Single-Family Dwellings
Instructor Rick Karg is has been a member of the ASHRAE 62.2 ventilation committee since 2007 and heads the existing dwellings group. He served as the lead editor of ASHRAE’s Guideline 24-2015, a document that supplements the ASHRAE 62.2 standard.
by Rick Karg
Mastering Hydronic System Design
Master Advanced Hydronic Design with John Siegenthaler. John works with you for 10 weeks - Learn to design state-of-the-art systems that deliver comfort, efficiency, and reliability.
by John Siegenthaler
Fundamentals: Air Source Heat Pumps
This course will provide an overview of the mechanics of this alternative heating system, as well as discuss the advantages and disadvantages of installation, capabilities, and control.
by Michael Simons
Finally Fossil-Fuel-Free: Air-to-Water Heat Pump & Ventilation Retrofit
Air-to-water heat pumps have generated a lot of excitement for their enormous retrofit potential. This case study details one home’s retrofit to an AWHP system, which was developed by hydronics experts to be simple and repeatable.
by Brian Just
Radiant Cooling and Heating
Millions of dollars are now being invested into radiant cooling and heating and thermal comfort research. In this free 1-hour lecture, Robert will take you through the radiant design sequence he has used for 30 years.
by Robert Bean
Achieving Hydraulic Separation in Hydronic Systems
This lecture will outline 4 different methods for providing hydraulic separation, some of which may reduce the installation and operating cost of a system.
by John Siegenthaler
Commercial Geothermal Heat Pump System Design
Dr. Charles Remund, author of the IGSHPA Design Manual, explains how to design a ground heat exchanger for a commercial geothermal system.
by Dr. Charles Remund
Bard Wall-Mount Maintenance & Prep for Modular Yard Tech's
The information you need to professionally maintain and setup Bard wall-mount units helping you achieve your customers standards
by Rick Downie
Geothermal HVAC Design: From Building Loads to Bore Field Design
Learn Geothermal HVAC Design fundamentals, with emphasis on building load (residential, commercial and institutional) development, leading to bore field specification from industry legend Al Koenig.
by Albert Koenig
Installing & Commissioning Real Time Geothermal Monitoring Systems
Real time geothermal monitoring has finally become economical for installers. Real time monitoring significantly reduces risk for property owners and can verify system performance. Take this course to learn how to install and commission the GES.
by Matt Davis
Deep Boreholes in GSHP Systems: Pressure Considerations & Installation Practices
This course focuses on the necessary calculations along with the recommended installation practices for deep geothermal borehole design and installation.
by Ryan Carda
Mastering the Outdoor Reset Curve
In this free lecture plumbing and hydronics expert Dave Yates explains how to set up a reset curve, tailor it for any application, and present it to your customers in a way that will separate you from your competition.
by Dave Yates
Bard Factory Training for MC5000 Series Controller (1 to 6 wall-mount units)
This course features the MC5300 & MC5600 Multi-Unit controllers for standard Air Conditioners and Heat Pumps and is recommended for Engineers, Architects, Reps, OEM’s, Distributors, Contractors, Installers and Service Technicians.
by Rick Downie
Bard Products - Certified AT&T DC-FCU Installation Class
The new AT&T National Standards requires all new HVAC systems to provide DC Free-Cooling, as well as advanced controls to maximize efficiency and integration of alarms. Because of the advanced nature of the equipment, AT&T is also mandating training to en
by Rick Downie